CLI Guide

Layer 3 Routing Commands 1526
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
User Guidelines
The MAC ACL must be configured before it is linked to a route map. Trying
to link to an unconfigured MAC ACL causes an error.
Actions in the MAC ACL configuration are applied with other actions
configured in the route map. When a MAC ACL referenced by a route map is
removed, the route map rule is also removed.
Example
console(config-route-map)#match mac-list mac-test
route-map
Use this command to create a policy based route map. Use the no form of this
command to delete a route map or one of its statements.
Syntax
route-map map-tag [permit | deny] [sequence-number]
no route-map map-tag [permit | deny] [sequence-number]
• map-tag — Text name of the route map. Route maps with the same name
are grouped together in order of their sequence numbers. A route map
name may be up to 32 characters long and comprised of any printable
character except a question mark. Enclose the map-tag in quotes to
embed blanks in the name.
• permit — (Optional) Permit routes that match all of the match
conditions in the route map.
• deny — (Optional) Deny routes that match all of the match conditions in
the route map. Packets matching deny routes use the routing table.