CLI Guide

Layer 3 Routing Commands 1770
LSAs Retransmitted................0
LS Update Max Receive Rate........20 pps
LS Update Max Send Rate...........10 pps
Number of LSAs Received
T1 (Router).......................10
T2 (Network)......................0
T3 (Net Summary)..................300
T4 (ASBR Summary).................15
T5 (External).....................20
T7 (NSSA External)................0
T9 (Link Opaque)..................0
T10 (Area Opaque).................0
T11 (AS Opaque)...................0
Total.............................345
OSPFv2 Queue Statistics
Current Max Drops Limit
Hello 0 10 0 500
ACK 2 12 0 1680
Data 24 47 0 500
Event 1 8 0 1000
show ip ospf virtual-links
Use the show ip ospf virtual-links command to display the OSPF Virtual
Interface information for a specific area and neighbor or for all neighbors.
Syntax
show ip ospf virtual-links [vrf vrf-name] [area-id neighbor-id]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
• area-id — Identifies the OSPF area whose ranges are being displayed.
(Range: IP address or decimal from 0–4294967295)
• neighbor-id — Identifies the neighbor’s router ID. (Range: Valid IP
address)
Default Configuration
Show information for all OSPF Virtual Interfaces.