CLI Guide

Dell EMC Networking CLI 198
Unicast Reverse Path Forwarding
Virtual Router
Virtual Router Redundancy
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
system urpf enable Globally enables uRPF checking of routes. GC
ip verify unicast source Enable loose uRPF checks on an interface. IC
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
description Assigns descriptive text to the VRF instance. VR
ip vrf Creates a virtual router with a specified name
and enters Virtual Router Configuration mode.
GC
ip vrf forwarding Associates an interface with a VRF instance. IC or
IR
maximum routes Reserves the number of routes allowed and sets
the maximum limit on the number of routes for
a virtual router instance in the total routing
table space for the router.
VR
show ip vrf Shows the interfaces associated with a VRF
instance.
PE
Command Description Mode
a
ip vrrp Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
GC
vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
vrrp authentication Sets the authentication details value for the
virtual router configured on a specified
interface.
IC