CLI Guide

Dell EMC Networking CLI 200
Virtual Router Redundancy Protocol version 3 Commands
Command Description Mode
a
fhrp version vrrp v3 Enables Virtual Router Redundancy
Protocol version 3 (VRRPv3)
configuration on the switch.
VRRP
vrrp Creates a Virtual Router Redundancy
Protocol version 3 (VRRPv3) group and
enter VRRPv3 Group Configuration
mode.
IC
show vrrp Displays information about the status and
configuration details for a given Virtual
Router Redundancy Protocol version 3
(VRRPv3) group configured on the
specified interface for a specified IP
address family.
UE,
PE,
GC
accept-mode Controls whether a virtual router in
master state will accept packets addressed
to the address owner’s Virtual IP address
as its own if it is not the Virtual IP address
owner.
VRRP
preempt Configures the virtual router to
preemptively take over as master virtual
router for a Virtual Router Redundancy
Protocol version 3 (VRRPv3) group if it
has higher priority than the current
master virtual router.
VRRP
priority Sets the priority level of the device within
a Virtual Router Redundancy Protocol
version 3 (VRRPv3) group.
VRRP