CLI Guide

Layer 2 Switching Commands 500
Remote Tw_sys_tx Echo(usec).......21
Remote Tw_sys_rx (usec)...........21
Remote Tw_sys_tx Echo(usec).......21
Remote fallback Tw_sys (usec).....21
Tx DLL enabled....................Yes
Tx DLL ready......................Yes
Rx DLL enabled....................Yes
Rx DLL ready......................Yes
Cumulative Energy Saving (W * H)..2.37
Time Since Counters Last Cleared..1 day 20 hr 47 min 34 sec
show green-mode
Use the show green-mode command to display the green-mode configuration
for the whole system.
Syntax
show green-mode
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
The status is shown only for the modes supported on the corresponding
hardware platform regardless of whether the feature is enabled or disabled.
This command output provides the following information.
Term Description
Energy Detect
Energy-detect
Config
Energy-detect Admin mode is enabled or disabled.
Energy-detect Opr Energy detect mode is currently active or inactive. The energy
detect mode may be administratively enabled, but the
operational status may be inactive.