CLI Guide

Security Commands 968
Command History
Output updated in version 6.6 firmware.
Example
The following example shows the output for a single Ethernet interface.
console#show authentication interface gi1/0/1
Authentication Manager Status.................. Enabled
Interface...................................... Gi1/0/1
Port Control Mode.............................. auto
Host Mode...................................... multi-host
Authentication Restart timer................... 300
Configured method order........................ mab undefined undefined
Enabled method order........................... mab undefined undefined
Configured method priority..................... dot1x mab captive-portal
Enabled method priority........................ dot1x mab undefined
Reauthentication Enabled....................... False
Reauthentication Session timeout from server .. True
Maximum Users.................................. 48
Guest VLAN ID..... ............................ 0
Authentication retry attempts.................. 3
Unauthenticated VLAN ID........................ 0
Critical Vlan Id............................... 0
Authentication Violation Mode.................. Restrict
Authentication Server Dead action.............. None
Critical VLAN ID The VLAN ID to be used to authorize clients that time out due
to unreachable RADIUS servers.
Authentication
Violation Mode
The action to be taken when a security violation occurs on a
port.
Authentication
Server Dead Action
The action to be undertaken for data clients when all RADIUS
servers are found dead.
Authentication
Server Dead Action
for Voice
The action to be undertaken for voice clients when all RADIUS
servers are found dead.
Authentication
Server Alive Action
The action to be undertaken for data clients when a RADIUS
server comes alive after all configured RADIUS servers were
found dead.
Output Parameter Description