CLI Guide

pool-summary (historical)
pool-hist-statistics (historical)
tier-summary (historical)
tier-hist-statistics (historical)
readcache-hist-statistics (historical)
status
See also
reset all-statistics
reset pool-statistics
show pools
show ports
Description Shows information about host ports in each controller.
Minimum role monitor
Syntax
show ports
[detail]
Parmeters
detail
Optional. This parameter shows additional detail about the port status, including SFP information.
Output
Ports
Controller ID and port number
Media
• FC(P): Fibre Channel Point-to-Point
• FC(L): Fibre Channel-Arbitrated Loop (public or private)
• FC(-): Not applicable, as when the port is disconnected
• SAS: Serial Attached SCSI
• iSCSI: Internet SCSI
Target ID
For an FC port, its WWPN. For a SAS port, its WWPN. For an iSCSI port, its node name (typically the IQN).
Status
• Up: The port is cabled and has an I/O link.
• Warning: Not all of the port’s PHYs are up.
• Error: The port is reporting an error condition.
• Not Present: The controller module is not installed or is down.
• Disconnected: Either no I/O link is detected or the port is not cabled.
Speed(A)
• Actual link speed in Gbit/s.
• Blank if not applicable.
Speed(C)
Configured host-port link speed in Gbit/s. Not shown for SAS.
• FC: Auto, 16Gb, 8Gb, or 4Gb
• iSCSI: Auto
• Blank if not applicable
Health
Alphabetical list of commands
219