Administrator Guide

NOTE: This option is unavailable when replicating volume groups.
5. Specify a date and a time in the future to be the first instance when the scheduled task will run, and to be the starting point
for any specified recurrence.
● To set the Date value, enter the current date in the format YYYY-MM-DD.
● To set the Time value, enter two-digit values for the hour and minutes and select either AM, PM, or 24H (24-hour
clock).
6. If you want the task to run more than once, select the Repeat check box.
● Specify how often the task should repeat. Enter a number and select the appropriate time unit. Replications can recur no
less than 30 minutes apart.
● Clear the End checkbox is cleared to allow the schedule to run without an end date, or select the check box and specify
when the schedule should stop running.
● Clear Time Constraint checkbox to allow the schedule to run at any time, or select the check box to specify a time
range within which the schedule should run.
● Clear Date Constraint checkbox to allow the schedule to run on any day, or select the check box to specify the days
when the schedule should run.
7. Click Apply.
A confirmation panel appears.
8. Click OK.
Delete a replication schedule
Perform the following steps to delete a replication schedule:
1. From the Replication Sets table on the primary system, select a replication set that has an associated schedule.
2. Select Action > Manage Schedules. The Manage Schedules panel opens.
3. Select the schedule to delete.
4. Click Delete Schedule.
A confirmation panel appears.
5. Click OK.
134
Working in the Replications topic