CLI Guide

See also
set controller-date
set ntp-parameters
show ntp-status
show controllers
Description Shows information about each controller module.
Minimum role monitor
Syntax show controllers
Output
Controller module ID: A or B.
Serial Number
● Serial number.
● Not Available: The controller module is down or not installed.
Hardware Version
Hardware version.
CPLD Version
Complex Programmable Logic Device firmware version.
MAC Address
Network port MAC address.
WWNN
Storage system World Wide Node Name (WWNN).
IP Address
Network port IP address.
IP Subnet Mask
Network port IP subnet mask.
IP Gateway
Network port gateway IP address.
Disks
Number of disks in the storage system.
Virtual Pools
Number of virtual pools in the storage system.
Vdisks (v2)
Disk Groups (v3)
Number of disk groups in the storage system.
System Cache Memory (MB)
Controller module cache memory size, in MB, including CPU memory available to I/O.
Host Ports
Number of host ports in the controller module.
Disk Channels
Number of expansion ports in the controller enclosure.
Disk Bus Type
Type of interface between the controller module and disks:
Alphabetical list of commands
175