CLI Guide

The number of read operations since these statistics were last reset or since the controller was
restarted.
Writes
The number of write operations since these statistics were last reset or since the controller was
restarted.
Data Read
The amount of data read since these statistics were last reset or since the controller was restarted.
Data Written
The amount of data written since these statistics were last reset or since the controller was
restarted.
Num Forwarded Cmds
The current count of commands that are being forwarded or are queued to be forwarded to the
partner controller for processing. This value will be zero if no commands are being forwarded or are
queued to be forwarded.
Reset Time
The date and time, in the format year-month-day hour:minutes:seconds, when these
statistics were last reset, either by a user or by a controller restart.
The total amount of hours the controller has been powered on in its lifetime.Total Power On
Hours
Examples
Show statistics for controller A.
# show controller-statistics a
Basetypes
controller-statistics
status
See also
reset all-statistics
reset controller-statistics
show debug-log-parameters
Description
Shows which debug message types are enabled (On) or disabled (Off) for inclusion in the Storage
Controller debug log.
NOTE: This command is for use by or with direction from technical support.
Minimum role monitor
Syntax show debug-log-parameters
Output For a description of each message type parameter, see set debug-log parameters.
Examples Show debug log parameters.
# show debug-log-parameters
Basetypes debug-log-parametersstatus
See also set debug-log-parameters
show disk-groups
Description
Shows information about disk groups. The command will show information for all disk groups by
default, or you can use parameters to filter the output.
178 Alphabetical list of commands