CLI Guide

The enclosure model.
EMP controller-ID BUS:ID Rev
The channel ID and firmware revision of the Enclosure Management Processor in each controller’s
Expander Controller.
Midplane Type
An abbreviation that describes the enclosure midplane's rack-unit height, maximum number of disks,
maximum data rate to disks (Gbit/s), and hardware version.
Health
● Show information about all enclosures in the system.
# show enclosures
OK
● Degraded
● Fault
● N/A
● Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Drawer Information
Drawer
The number of the drawer.
Name
The name of the drawer.
Status
Status of the drawer
● Up
● Warning
● Error
● Unknown
● Unavailable
● Not Present
Health
● OK
● Degraded
● Fault
● N/A
● Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Examples
Show information about all enclosures in the system.
# show enclosures
Basetypes
enclosures
status
Alphabetical list of commands 197