CLI Guide

Part Number
● (blank): Not applicable.
Firmware version
● (blank): Not applicable.
● The firmware revision of a fan FRU.
Hardware version
● (blank): Not applicable.
Health
● OK
● Degraded
● Fault
● N/A
● Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue
Examples Show about all fans in the system.
# show fans
Basetypes fan
status
See also show power-supplies
show fde-state
Description
Shows Full Disk Encryption information for the storage system.
NOTE:
If you insert an FDE disk into a secured system and the disk does not come up in the expected state,
perform a manual rescan by using the rescan command.
Minimum role monitor
Syntax
show fde-state
Output
FDE Security Status
● Unsecured. The system has not been secured with a passphrase.
● Secured. The system has been secured with a passphrase.
● Secured, Lock Ready. The system has been secured and lock keys have been cleared. The
system will become locked after the next power cycle.
● Secured, Locked. The system is secured and the disks are locked to data access, preventing
their use.
Lock Key ID
The current lock ID is displayed.
Import Key ID
The previous or import lock ID is displayed.
FDE Configuration Time
If the system is secured, the time at which the current lock ID was set.
Alphabetical list of commands 203