CLI Guide

Shown by the initiator parameter. For an FC initiator, its WWPN. For a SAS initiator, its WWPN.
For an iSCSI initiator, its node name (typically the IQN).
Host-Port-Identifier (v2)For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For
an iSCSI initiator, its node name (typically the IQN).
● all other initiators: The volume's default mapping.
Identifier (v3)
See Host-Port-Identifier, above.
Initiator-Identifier
Shown for a volume group mapping.
● For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an iSCSI initiator, its node name
(typically the IQN).
● all other initiators: The volume's default mapping.
LUN
● The LUN that identifies the volume to a host.
● For a volume group, * means multiple LUNs are represented in the group.
● Blank if not mapped or mapped as no-access.
Name
The name of a volume or initiator.
Nickname
● For a host, its name in the format host-name.*, where the * represents all initiators in the
host.
● For a host group, its name in the format host-group.*.*, where the first * represents all
hosts in the host group and the second * represents all initiators in those hosts.
● Blank if not set or for all other initiators/
Ports
● The controller host ports to which the mapping applies.
● Blank if not mapped or mapped as no-access.
Profile
Standard: Default profile.
Serial Number
The serial number of the volume group or volume.
Volume
● For a volume, its name.
● For a volume group, its name in the format volume-group.*, where the * represents all
volumes in the group.
Examples
Show mappings for all volumes.
# show maps
Show mapping information for all initiators.
# show maps initiator
Show mappings for volume group VGroup1 and ungrouped volume v1.
# show maps VGroup1.*,v1
Basetypes
initiator-view
host-group-view
host-view-mappings
volume-group-view
volume-group-view-mappings
Alphabetical list of commands 215