CLI Guide

show refresh-counters
Description
In XML API format only, shows when the data represented by the basetype was last updated.
The value 0 means the data has never been updated and is not cached. A value other than 0 is a
timestamp indicating that the data has been updated. If the value has changed since the last time you
called this command then the data has changed.
Minimum role monitor
Syntax
show refresh-counters
Basetypes
refresh-counters
status
See also set cli-parameters
show remote-systems
Description Shows information about remote systems associated with the local system. This command applies to
linear storage only.
Minimum role monitor
Syntax
show remote-systems
[system]
Parameters
system
Optional. The name or network-port IP address of the remote system about which to show
information.
Output
System Name
The name of the remote system.
System Contact
The name of the person who administers the remote system.
System Location
The location of the remote system.
System Information
A brief description of the remote system.
Vendor Name
The vendor name of the remote system.
Product ID
The product model identifier of the remote system.
Product Brand
The brand name of the remote system.
IP Address Controller A
The IP address of the network port in controller A in the remote system.
IP Address Controller B
The IP address of the network port in controller B in the remote system.
Username
The name of a user with the manage role in the remote system.
Alphabetical list of commands
233