CLI Guide

Status
● Uninitialized: This system hasn’t communicated with the remote system.
● Ready: This system has contacted the remote system and it is ready to use.
● Connected: This system is transferring data to the remote system.
● Not Connected: The system is not connected to the remote system.
Last Connected
Date and time, in the format year-month-day hour:minutes:seconds (UTC), when
successful communication was last established between the Management Controller in the local
system and the Management Controller in the remote system. This value does not indicate when
connection status was last determined, and will not be updated if the remote Management Controller
is not accessible or if the connection status is Not Connected.
Examples Show information about remote system System2.
# show remote-systems System2
Basetypes
remote-system
status
See also delete remote-system
show replication-sets
Description
Shows information about replication sets in the peer connection. This command applies to virtual
storage only. You can view information about all replication sets or a specific replication set.
For virtual storage, you can run this command on either the primary or secondary system. In console
mode, this command does not show the serial numbers of items such as replication volumes. To see
serial numbers, run this command in API mode.
Timestamps use the local time zone of the system on which this command is run.
NOTE: If you change the time zone of the secondary system in a replication set whose primary
and secondary systems are in different time zones, you must restart the system to enable
management interfaces to show proper time values for replication operations.
Properties shown only in API output are described in API basetypes properties
Minimum role monitor
Syntax
show replication-sets
[replication-set-ID]
Parameters
replication-set-ID
Optional. The name or serial number of a replication set for which to display information at the
replication set level. A name that includes a space must be enclosed in double quotes. If this
parameter is omitted, information is shown for all replication sets.
Output
Overview information:
Name
The replication set name.
Group
● Yes: The replication set is part of a group.
● No: The replication set is not part of a group.
Primary Location
The location of the primary volume in the replication set: Local or Remote.
234 Alphabetical list of commands