CLI Guide

See also
show pools
show volumes
show snmp-parameters
Description Shows SNMP settings for event notification.
Minimum role monitor
Syntax
show snmp-parameters
Output
SNMP Trap Notification Level
● crit: Sends notifications for Critical events only.
● error: Sends notifications for Error and Critical events.
● warn: Sends notifications for Warning, Error, and Critical events.
● resolved: Sends notifications for Resolved, Warning, Error, and Critical events.
● info: Sends notifications for all events.
● none: No events are sent as traps and traps are disabled.
SNMP Trap Host IP#
The IP address of each trap host. The value can be an IPv4 address, IPv6 address, or FQDN.
SNMP read community
The community string for read-only access. The value is obscured for users having only the monitor
role and is shown in clear text for users having the manage role.
SNMP write community
The community string for write access. The value is obscured for users having only the monitor role
and is shown in clear text for users having the manage role.
Examples Show SNMP notification settings.
# show snmp-parameters
Basetypes
snmp-parameters
status
See also
set snmp-parameters
set protocols
show protocols
show support-assist
Description
Shows information about the SupportAssist feature.
Minimum role monitor
Syntax
show support-assist
Output SupportAssist status:
SupportAssist State
● Running – The service is enabled.
● Disabled – The service is disabled
● Paused – A user has temporarily suspended the service, preventing data transmission to the
support server.
Alphabetical list of commands 245