CLI Guide

show unwritable-cache
Description Shows the percentage of unwritable data in the system. This data has not been written to disk
because it is associated with a volume that no longer exists or whose disks are not online. If the data
is needed, the volume’s disks must be brought online. If the data is not needed it can be cleared, in
which case it will be lost and data will differ between the host and disk.
NOTE: If you are uncertain whether to clear unwritable cache data, contact technical support for
assistance.
Minimum role monitor
Syntax
show unwritable-cache
Output
Percent of unwritable cache in controller ID
The percentage of cache space occupied by unwritable data in the indicated controller module.
Examples Show the percentage of unwritable cache data in each controller.
# show unwritable-cache
Basetypes
unwritable-cache
status
See also clear cache
show users
Description
Shows configured user accounts.
Minimum role monitor
Syntax
show users
[show-snmp-password]
[user]
Parameters
show-snmp-password
Optional. Minimum role: manage. For SNMPv3 users, this parameter shows Password and Privacy
Password values in clear text for reference when configuring users in the corresponding management
application. If this parameter is omitted, password values are not displayed for security reasons.
user
Optional. Shows settings for the specified user only. If this parameter is omitted, settings are shown
for all users.
Output
Username
The user name.
Roles
● monitor: The user can view but not change system settings.
● manage: The user can view and change system settings.
● diagnostic: The user can view and change system settings.
User Type
The experience level of the user: Novice, Standard, Advanced, or Diagnostic. This parameter does not
affect access to commands.
User Locale
The display language.
Alphabetical list of commands 257