CLI Guide

show vdisks
Description Shows information about all or specified linear disk groups. This command applies to linear storage
only.
Minimum role monitor
Syntax
show vdisks
[vdisks]
Parameters
vdisks
Optional. A comma-separated list of the names or serial numbers of the linear disk groups to show
information about. A name that includes a space must be enclosed in double quotes.
Output
Name
The name of the disk group.
Size
The size of the disk group.
Free
The amount of free (available) space in the disk group.
Own
Either the preferred owner during normal operation or the partner controller when the preferred
owner is offline.
Pref
The controller that owns the disk group and its volumes during normal operation.
RAID
The disk-group RAID level.
Class
● Linear: The disk group acts as a linear pool.
● Virtual: The disk group is in a virtual pool.
Disks
The number of disks in the disk group.
Spr
The number of spares assigned to the disk group.
Chk
● For RAID levels except NRAID, RAID 1, and RAID 50, the configured chunk size for the disk group.
● For NRAID and RAID 1, chunk-size has no meaning and is therefore shown as not applicable
(N/A).
● For RAID 50, the disk-group chunk size calculated as: configured-chunk-size x
(subgroup-members - 1). For a disk group configured to use 64-KB chunk size and 4-disk
subgroups, the value would be 192k (64KB x 3).
Status
● CRIT: Critical. The disk group is online but isn't fault tolerant because some of its disks are down.
● DMGD: Damaged. The disk group is online and fault tolerant, but some of its disks are damaged.
● FTDN: Fault tolerant with a down disk. The vdisk is online and fault tolerant, but some of its disks
are down.
● FTOL: Fault tolerant and online.
● MSNG: Missing. The disk group is online and fault tolerant, but some of its disks are missing.
● OFFL: Offline. Either the disk group is using offline initialization, or its disks are down and data
may be lost.
Alphabetical list of commands
259