CLI Guide
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System CLI Guide
- Contents
- Using the CLI
- Categorical list of commands
- Alphabetical list of commands
- abort copy
- abort replication
- abort scrub
- abort verify
- add disk-group
- add host-group-members
- add host-members
- add ipv6-address
- add spares
- add storage
- add volume-group-members
- check firmware-upgrade-health
- check support-assist
- clear cache
- clear disk-metadata
- clear dns-parameters
- clear events
- clear expander-status
- clear fde-keys
- clear fenced-data
- clear replication-queue
- clear support-assist-proxy
- copy volume
- create certificate
- create chap-record
- create host
- create host-group
- create peer-connection
- create replication-set
- create schedule
- create snapshots
- create task
- create user
- create vdisk
- create volume
- create volume-group
- create volume-set
- delete all-snapshots
- delete chap-records
- delete host-groups
- delete hosts
- delete initiator-nickname
- delete peer-connection
- delete pools
- delete remote-system
- delete replication-set
- delete schedule
- delete snapshot
- delete task
- delete user
- delete vdisks
- delete volume-groups
- delete volumes
- dequarantine
- exit
- expand disk-group
- expand vdisk
- expand volume
- fail
- help
- map volume
- meta
- ping
- query peer-connection
- recover replication-set
- release volume
- remove disk-groups
- remove host-group-members
- remove host-members
- remove ipv6-address
- remove spares
- remove volume-group-members
- replicate
- rescan
- reset all-statistics
- reset controller-statistics
- reset disk-error-statistics
- reset disk-group-statistics
- reset disk-statistics
- reset dns-management-hostname
- reset host-link
- reset host-port-statistics
- reset pool-statistics
- reset smis-configuration
- reset snapshot
- reset vdisk-statistics
- reset volume-statistics
- restart mc
- restart sc
- restore defaults
- resume replication-set
- rollback volume
- scrub disk-groups
- scrub vdisk
- scrub volume
- send support-assist-logs
- set advanced-settings
- set chap-record
- set cli-parameters
- set cloud-iq
- set controller-date
- set debug-log-parameters
- set disk
- set disk-group
- set disk-parameters
- set dns-management-hostname
- set dns-parameters
- set email-parameters
- set enclosure
- set expander-fault-isolation
- set expander-phy
- set fde-import-key
- set fde-lock-key
- set fde-state
- set host
- set host-group
- set host-parameters
- set host-port-mode
- set initiator
- set ipv6-network-parameters
- set iscsi-parameters
- set led
- set network-parameters
- set ntp-parameters
- set password
- set peer-connection
- set pool
- set prompt
- set protocols
- set replication-set
- set schedule
- set snapshot-space
- set snmp-parameters
- set support-assist
- set support-assist-info
- set support-assist-proxy
- set syslog-parameters
- set system
- set task
- set user
- set vdisk
- set volume
- set volume-cache-parameters
- set volume-group
- show advanced-settings
- show cache-parameters
- show certificate
- show chap-records
- show cli-parameters
- show cloud-iq
- show configuration
- show controller-date
- show controllers
- show controller-statistics
- show debug-log-parameters
- show disk-groups
- show disk-group-statistics
- show disk-parameters
- show disks
- show disk-statistics
- show dns-management-hostname
- show dns-parameters
- show email-parameters
- show enclosures
- show events
- show expander-status
- show fan-modules
- show fans
- show fde-state
- show fenced-data
- show frus
- show host-groups
- show host-phy-statistics
- show host-port statistics
- show initiators
- show inquiry
- show ipv6-addresses
- show ipv6-network-parameters
- show iscsi-parameters
- show license
- show maps
- show network-parameters
- show ntp-status
- show peer-connections
- show pools
- show pool-statistics
- show ports
- show power-supplies
- show protocols
- show provisioning
- show redundancy-mode
- show refresh-counters
- show remote-systems
- show replication-sets
- show replication-snapshot-history
- show sas-link-health
- show schedules
- show sensor-status
- show service-tag-info
- show sessions
- show shutdown-status
- show snapshot-space
- show snapshots
- show snmp-parameters
- show support-assist
- show syslog-parameters
- show system
- show system-parameters
- show tasks
- show tiers
- show tier-statistics
- show unwritable-cache
- show users
- show vdisks
- show vdisk-statistics
- show versions
- show volume-copies
- show volume-groups
- show volume-names
- show volume-reservations
- show volume-statistics
- show volumes
- shutdown
- suspend replication-set
- test
- trust
- unfail controller
- unmap volume
- verify disk-groups
- verify links
- verify vdisk
- API basetype properties
- adapt-expand-preview
- advanced-settings-table
- cache-parameter
- cache-settings
- certificate-status
- chap-records
- cli-parameters
- cloud-iq
- code-load-readiness
- code-load-readiness-reasons
- communication-ports
- compact-flash
- contact-information
- controller-cache-parameters
- controllers
- controller-statistics
- copy-volumes
- cs-replicate-tasks
- cs-replication
- cs-replication-set
- current-replication-snapshots
- debug-log-parameters
- disk-groups
- disk-groups-preview
- disk-group-statistics
- disk-group-statistics-paged
- disk-hist-statistics
- disk-statistics
- dns-parameters
- drawers
- drive-parameters
- drive-summary
- drives
- email-parameters
- enclosure-fru
- enclosure-list
- enclosures
- events
- eventsLogs
- expander-ports
- expander-versions
- expanders
- fan
- fan-module-versions
- fan-modules
- fc-port
- fde-state
- fenced-data
- fru-versions
- host
- host-group
- host-group-view
- host-port-statistics
- host-view-mappings
- initiator
- initiator-view
- inquiry
- io-modules
- iom-versions
- ipv6-network-parameters
- iscsi-parameters
- iscsi-port
- license
- local-ports
- local-ports-detail
- log-header-table
- mgmt-hostnames
- midplane-versions
- network-parameters
- ntp-status
- peer-connection-info
- peer-connections
- peer-controllers
- peer-ports
- pool-hist-statistics
- pool-statistics
- pool-summary
- pools
- port
- power-supplies
- product-info
- provisioning
- proxy-information
- psu-versions
- readcache-hist-statistics
- redundancy
- refresh-counters
- remote-ports
- remote-ports-detail
- remote-system
- replication-snapshot-history
- reset-snapshot-tasks
- resettable-statistics
- sas-host-phy-statistics
- sas-port
- sas-status-controller-a
- sas-status-drawer
- schedules
- security-communications-protocols
- sensors
- service-tag-info
- sessions
- show-other-MC-status
- shutdown-status
- sideplanes
- snap-space
- snapshots
- snapshot-with-retention-tasks
- snap-tasks
- snmp-parameters
- spares-preview
- status
- storage-preview
- support-assist
- syslog-parameters
- system
- system-parameters-table
- tasks
- tier-hist-statistics
- tier-statistics
- tier-summary
- tiers
- time-settings-table
- unhealthy-component
- unused-disks-preview
- unwritable-cache
- users
- vdisk-hist-statistics
- vdisk-statistics
- versions
- virtual-disk-summary
- virtual-disks
- volume-groups
- volume-group-view
- volume-group-view-mappings
- volume-names
- volume-reservations
- volumes
- volume-statistics
- volume-view
- volume-view-mappings
- Settings changed by restore defaults
Read Ahead
Shown by the details parameter. The read-ahead cache setting:
● Disabled: Read-ahead is disabled.
● Adaptive: Adaptive read-ahead is enabled, which allows the controller to dynamically calculate
the optimum read-ahead size for the current workload.
● Stripe: Read-ahead is set to one stripe. The controllers treat NRAID and RAID-1 disk groups
internally as if they have a stripe size of 512 KB, even though they are not striped.
● 512 KB, 1 MB, 2 MB, 4 MB, 8 MB, 16 MB, or 32 MB: Size selected by a user.
Reason
If Health is not OK, this field shows the reason for the health state.
Role
Shown by the details parameter.
● Copy Source: The volume is the source for a volume copy operation.
● Copy Destination: The volume is the destination for a volume copy operation.
● Primary: The volume is the primary volume in a replication set.
● Secondary: The volume is the secondary volume in a replication set.
● (blank): Not applicable.
Serial Number
Shown by the details parameter. The serial number of the volume.
Size
The total size of the volume.
Snap-Pool
Shown by the details parameter. Not applicable.
Snap Retention Priority
Shown by the details parameter. The retention priority for snapshots of the volume.
● never-delete: Snapshots will never be deleted.
● high: Snapshots may be deleted after all eligible medium-priority snapshots have been deleted.
● medium: Snapshots may be deleted after all eligible low-priority snapshots have been deleted.
● low: Snapshots may be deleted.
Snapshots that are mapped or are not leaves of a volume's snapshot tree are not eligible for
automatic deletion.
Tier Affinity
Shown by the details parameter.
● No Affinity: This setting uses the highest available performing tiers first and only uses the
Archive tier when space is exhausted in the other tiers. Volume data will swap into higher
performing tiers based on frequency of access and tier space availability.
● Archive: This setting prioritizes the volume data to the least performing tier available. Volume
data can move to higher performing tiers based on frequency of access and available space in the
tiers.
● Performance: This setting prioritizes volume data to the higher performing tiers. If no space
is available, lower performing tier space is used. Performance affinity volume data will swap into
higher tiers based upon frequency of access or when space is made available.
Total Size
The total size of the volume.
Type
● base: Base volume
● standard: Standard volume
Vdisk
The name of the vdisk that contains the volume.
272
Alphabetical list of commands