CLI Guide

See also
restart mc
restart sc
show shutdown-status
suspend replication-set
Description
Suspends the replication operations for the specified replication set. This command applies to virtual
storage only. You can run this command on the replication set’s primary system.
When you run this command, all replications in progress are paused and no new replications are
allowed to start. During the suspension period, you can abort paused replications using the abort
replication command. After you suspend replication, you must resume it using the resume replication-
set command to allow the replication set to resume replications that were in progress and allow new
replications to start.
If replications are attempted during the suspended period (including scheduled replications), the
replications will fail.
Minimum role manage
Syntax
suspend replication-set
replication-set-ID
Parameters
replication-set-ID
The name or serial number of the replication set for which to suspend replication.
Examples Suspend replications in replication set RS1.
# suspend replication-set RS1
See also
abort replication
create replication-set
delete replication-set
resume replication-set
set replication-set
show replication-sets
test
Description
Sends a test message to configured destinations for event notification and managed logs. After
issuing this command, verify that the test message reached its destinations.
Minimum role manage
Syntax
test
email|managedlogs|managedlogswarn|managedlogswrap|notification|snmp
[region crash1|crash2|crash3|crash4|ecdebug|mc|scdebug]
Output
email|managedlogs|managedlogswarn|managedlogswrap|notification|snmp
● email: This option behaves the same as the notification option and remains for backward
compatibility only.
● managedlogs: Specify this option to test receipt of the managed-logs notification that logs
need to be transferred. (Event 400)
274 Alphabetical list of commands