CLI Guide

Table 7. advanced-settings-table properties (continued)
Name Type Description
partner-notify string Shows whether the partner controller will be notified when a trigger condition
occurs.
● Disabled: Notification is disabled. The partner controller will continue using
its current caching mode.
● Enabled: Notification is enabled. The partner controller will change to write-
through mode for better data protection.
partner-notify-numeric uint32 Numeric equivalents for partner-notify values.
● 0: Disabled
● 1: Enabled
auto-write-back string Shows whether the cache policy will change from write-through to write-back
when the trigger condition is cleared.
● Disabled: Auto-write-back is disabled.
● Enabled: Auto-write-back is enabled.
auto-write-back-numeric uint32 Numeric equivalents for auto-write-back values.
● 0: Disabled
● 1: Enabled
disk-dsd-enable string Shows whether spinning disks that are available or are global spares will spin
down after a period of inactivity shown by the disk-dsd-delay property.
● Disabled: Drive spin down for available disks and global spares is disabled.
● Enabled: Drive spin down for available disks and global spares is enabled.
disk-dsd-enable-numeric uint32 Numeric equivalents for disk-dsd-enable values.
● 0: Disabled
● 1: Enabled
disk-dsd-delay uint16 Specifies the period of inactivity in minutes after which spinning disks that are
available or are global spares will spin down, from 1 to 360 minutes. The value 0
means spin down is disabled.
background-disk-scrub string Shows whether disks that are not in disk groups are automatically checked for
disk defects to ensure system health. The interval between background disk
scrub finishing and starting again is 72 hours.
● Disabled: Background disk scrub is disabled.
● Enabled: Background disk scrub is enabled.
background-disk-scrub-
numeric
uint32 Numeric equivalents for background-disk-scrub values.
● 0: Disabled
● 1: Enabled
managed-logs string Shows whether the managed logs feature is enabled, which allows log files to be
transferred from the storage system to a log-collection system to avoid losing
diagnostic data as logs fill.
● Disabled: The managed logs feature is disabled.
● Enabled: The managed logs feature is enabled.
managed-logs-numeric uint32 Numeric equivalents for managed-logs values.
● 0: Disabled
● 1: Enabled
single-controller string For a system that had two controller modules but now has only one and is
intended to be used as a single-controller system, this property shows whether
the operating/redundancy mode is set to Single Controller. This prevents the
system from reporting the absent partner controller as an error condition.
This parameter does not affect any other system settings. Installing a second,
functional controller module will change the mode to Active-Active ULP.
● Enabled: Single Controller mode is enabled.
290 API basetype properties