CLI Guide

Table 12. cli-parameters properties (continued)
Name Type Description
and storage-size-base is set to 10, the size 0.11709 TB is instead shown as
117.1 GB.
storage-size- units-numeric uint32 Numeric equivalents for storage-size-units values.
● 0: Auto
● 1: MB
● 2: GB
● 3: TB
temperature-scale string
● Fahrenheit: Temperatures are shown in degrees Fahrenheit.
● Celsius: Temperatures are shown in degrees Celsius.
temperature-scale- numeric uint32 Numeric equivalents for temperature-scale values.
● 0: Fahrenheit
● 1: Celsius
user-type string The experience level of the logged-in user.
● Novice
● Standard
● Advanced
● Diagnostic
user-type-numeric uint32 Numeric equivalents for user-type values.
● 1: Novice
● 2: Standard
● 3: Advanced
● 4: Diagnostic
username string The logged-in user name.
usergroupname string The logged-in user group name. Shows the real name for an LDAP user or
undefined for a local user.
management-mode string The management mode used in the current CLI session.
● Linear: Uses linear-storage terminology in command output and system
messages. For example, vdisk for disk groups and pools.
● Virtual: Uses terminology in command output and system messages that
is generalized for managing virtual and linear storage. For example, disk
group for disk groups and pool for pools.
management-mode-numeric uint32 Numeric equivalents for management-mode values.
● 2: Linear
● 3: Virtual
cloud-iq
This basetype is used by show cloud-iq on page 173.
Table 13. chap-records properties
Name Type Description
cloud-iq string Shows whether the ability to remotely monitor the system by using the Dell EMC
CloudIQ application is enabled or disabled.
● Enabled: Use of the CloudIQ application is enabled.
● Disabled: Use of the CloudIQ application is disabled.
cloud-iq-numeric unit32 Numeric equivalents for cloud-iq values.
296 API basetype properties