CLI Guide
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System CLI Guide
- Contents
- Using the CLI
- Categorical list of commands
- Alphabetical list of commands
- abort copy
- abort replication
- abort scrub
- abort verify
- add disk-group
- add host-group-members
- add host-members
- add ipv6-address
- add spares
- add storage
- add volume-group-members
- check firmware-upgrade-health
- check support-assist
- clear cache
- clear disk-metadata
- clear dns-parameters
- clear events
- clear expander-status
- clear fde-keys
- clear fenced-data
- clear replication-queue
- clear support-assist-proxy
- copy volume
- create certificate
- create chap-record
- create host
- create host-group
- create peer-connection
- create replication-set
- create schedule
- create snapshots
- create task
- create user
- create vdisk
- create volume
- create volume-group
- create volume-set
- delete all-snapshots
- delete chap-records
- delete host-groups
- delete hosts
- delete initiator-nickname
- delete peer-connection
- delete pools
- delete remote-system
- delete replication-set
- delete schedule
- delete snapshot
- delete task
- delete user
- delete vdisks
- delete volume-groups
- delete volumes
- dequarantine
- exit
- expand disk-group
- expand vdisk
- expand volume
- fail
- help
- map volume
- meta
- ping
- query peer-connection
- recover replication-set
- release volume
- remove disk-groups
- remove host-group-members
- remove host-members
- remove ipv6-address
- remove spares
- remove volume-group-members
- replicate
- rescan
- reset all-statistics
- reset controller-statistics
- reset disk-error-statistics
- reset disk-group-statistics
- reset disk-statistics
- reset dns-management-hostname
- reset host-link
- reset host-port-statistics
- reset pool-statistics
- reset smis-configuration
- reset snapshot
- reset vdisk-statistics
- reset volume-statistics
- restart mc
- restart sc
- restore defaults
- resume replication-set
- rollback volume
- scrub disk-groups
- scrub vdisk
- scrub volume
- send support-assist-logs
- set advanced-settings
- set chap-record
- set cli-parameters
- set cloud-iq
- set controller-date
- set debug-log-parameters
- set disk
- set disk-group
- set disk-parameters
- set dns-management-hostname
- set dns-parameters
- set email-parameters
- set enclosure
- set expander-fault-isolation
- set expander-phy
- set fde-import-key
- set fde-lock-key
- set fde-state
- set host
- set host-group
- set host-parameters
- set host-port-mode
- set initiator
- set ipv6-network-parameters
- set iscsi-parameters
- set led
- set network-parameters
- set ntp-parameters
- set password
- set peer-connection
- set pool
- set prompt
- set protocols
- set replication-set
- set schedule
- set snapshot-space
- set snmp-parameters
- set support-assist
- set support-assist-info
- set support-assist-proxy
- set syslog-parameters
- set system
- set task
- set user
- set vdisk
- set volume
- set volume-cache-parameters
- set volume-group
- show advanced-settings
- show cache-parameters
- show certificate
- show chap-records
- show cli-parameters
- show cloud-iq
- show configuration
- show controller-date
- show controllers
- show controller-statistics
- show debug-log-parameters
- show disk-groups
- show disk-group-statistics
- show disk-parameters
- show disks
- show disk-statistics
- show dns-management-hostname
- show dns-parameters
- show email-parameters
- show enclosures
- show events
- show expander-status
- show fan-modules
- show fans
- show fde-state
- show fenced-data
- show frus
- show host-groups
- show host-phy-statistics
- show host-port statistics
- show initiators
- show inquiry
- show ipv6-addresses
- show ipv6-network-parameters
- show iscsi-parameters
- show license
- show maps
- show network-parameters
- show ntp-status
- show peer-connections
- show pools
- show pool-statistics
- show ports
- show power-supplies
- show protocols
- show provisioning
- show redundancy-mode
- show refresh-counters
- show remote-systems
- show replication-sets
- show replication-snapshot-history
- show sas-link-health
- show schedules
- show sensor-status
- show service-tag-info
- show sessions
- show shutdown-status
- show snapshot-space
- show snapshots
- show snmp-parameters
- show support-assist
- show syslog-parameters
- show system
- show system-parameters
- show tasks
- show tiers
- show tier-statistics
- show unwritable-cache
- show users
- show vdisks
- show vdisk-statistics
- show versions
- show volume-copies
- show volume-groups
- show volume-names
- show volume-reservations
- show volume-statistics
- show volumes
- shutdown
- suspend replication-set
- test
- trust
- unfail controller
- unmap volume
- verify disk-groups
- verify links
- verify vdisk
- API basetype properties
- adapt-expand-preview
- advanced-settings-table
- cache-parameter
- cache-settings
- certificate-status
- chap-records
- cli-parameters
- cloud-iq
- code-load-readiness
- code-load-readiness-reasons
- communication-ports
- compact-flash
- contact-information
- controller-cache-parameters
- controllers
- controller-statistics
- copy-volumes
- cs-replicate-tasks
- cs-replication
- cs-replication-set
- current-replication-snapshots
- debug-log-parameters
- disk-groups
- disk-groups-preview
- disk-group-statistics
- disk-group-statistics-paged
- disk-hist-statistics
- disk-statistics
- dns-parameters
- drawers
- drive-parameters
- drive-summary
- drives
- email-parameters
- enclosure-fru
- enclosure-list
- enclosures
- events
- eventsLogs
- expander-ports
- expander-versions
- expanders
- fan
- fan-module-versions
- fan-modules
- fc-port
- fde-state
- fenced-data
- fru-versions
- host
- host-group
- host-group-view
- host-port-statistics
- host-view-mappings
- initiator
- initiator-view
- inquiry
- io-modules
- iom-versions
- ipv6-network-parameters
- iscsi-parameters
- iscsi-port
- license
- local-ports
- local-ports-detail
- log-header-table
- mgmt-hostnames
- midplane-versions
- network-parameters
- ntp-status
- peer-connection-info
- peer-connections
- peer-controllers
- peer-ports
- pool-hist-statistics
- pool-statistics
- pool-summary
- pools
- port
- power-supplies
- product-info
- provisioning
- proxy-information
- psu-versions
- readcache-hist-statistics
- redundancy
- refresh-counters
- remote-ports
- remote-ports-detail
- remote-system
- replication-snapshot-history
- reset-snapshot-tasks
- resettable-statistics
- sas-host-phy-statistics
- sas-port
- sas-status-controller-a
- sas-status-drawer
- schedules
- security-communications-protocols
- sensors
- service-tag-info
- sessions
- show-other-MC-status
- shutdown-status
- sideplanes
- snap-space
- snapshots
- snapshot-with-retention-tasks
- snap-tasks
- snmp-parameters
- spares-preview
- status
- storage-preview
- support-assist
- syslog-parameters
- system
- system-parameters-table
- tasks
- tier-hist-statistics
- tier-statistics
- tier-summary
- tiers
- time-settings-table
- unhealthy-component
- unused-disks-preview
- unwritable-cache
- users
- vdisk-hist-statistics
- vdisk-statistics
- versions
- virtual-disk-summary
- virtual-disks
- volume-groups
- volume-group-view
- volume-group-view-mappings
- volume-names
- volume-reservations
- volumes
- volume-statistics
- volume-view
- volume-view-mappings
- Settings changed by restore defaults
Table 20. controllers properties (continued)
Name Type Description
controller-id string
● A: Controller A.
● B: Controller B.
controller-id-numeric uint32
● 0: B
● 1: A
serial-number string
● Serial number of the controller module.
● Not Available: The controller module is down or not installed.
hardware-version string Controller module hardware version.
cpld-version string Complex Programmable Logic Device (CPLD) firmware version.
mac-address string Controller network port MAC address.
node-wwn string Storage system World Wide Node Name (WWNN).
ip-address string Controller network port IP address.
ip-subnet-mask string Controller network port IP subnet mask.
ip-gateway string Controller network port gateway IP address.
ip6-link-local-address string The link-local IPv6 address.
ip6-auto-address string The automatically configured IPv6 address of the controller, when applicable.
ip61-address string First IPv6 address for the controller management port, if set.
ip62-address string Second IPv6 address for the controller management port, if set.
ip63-address string Third IPv6 address for the controller management port, if set.
ip64-address string Fourth IPv6 address for the controller management port, if set.
disks uint32 Number of disks in the storage system.
number-of-storage-pools uint32 Number of virtual pools in the storage system.
virtual-disks uint32 Number of disk groups in the storage system.
cache-memory-size uint32 Controller cache memory size (MB).
system-memory-size uint32 Controller module cache memory size, in MB, including CPU memory available to
I/O.
host-ports uint32 Number of host ports in the controller module.
drive-channels uint32 Number of expansion ports in the controller enclosure.
drive-bus-type string Controller interface to disks.
● SAS
drive-bus-type-numeric uint32 Numeric equivalent for drive-bus-type value.
● 8: SAS
status string
● Operational
● Down
● Not installed
status-numeric uint32 Numeric equivalents for status values.
● 0: Operational
● 1: Down
● 2: Not installed
failed-over string Indicates whether the partner controller has failed over to this controller.
● No: The partner controller has not failed over to this controller.
API basetype properties 301