CLI Guide

Table 27. debug-log-parameters properties (continued)
Name Type Description
ioc string Shows whether upper-layer, verbose debug messages for an I/O interface driver
are enabled for inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
ioc-numeric uint32 Numeric equivalents for ioc values.
● 0: Off
● 1: On
iod string Shows whether lower-layer, verbose debug messages for an I/O interface driver
are enabled for inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
iod-numeric uint32 Numeric equivalents for iod values.
● 0: Off
● 1: On
misc string Shows whether internal debug messages are enabled for inclusion in the Storage
Controller debug log.
● Off: Disabled.
● On: Enabled.
misc-numeric uint32 Numeric equivalents for misc values.
● 0: Off
● 1: On
host2 string Shows whether host/SCSI debug messages are enabled for inclusion in the
Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
host2-numeric uint32 Numeric equivalents for host2 values.
● 0: Off
● 1: On
raid string Shows whether RAID debug messages are enabled for inclusion in the Storage
Controller debug log.
● Off: Disabled.
● On: Enabled.
raid-numeric uint32 Numeric equivalents for raid values.
● 0: Off
● 1: On
cache string Shows whether cache debug messages are enabled for inclusion in the Storage
Controller debug log.
● Off: Disabled.
● On: Enabled.
cache-numeric uint32 Numeric equivalents for cache values.
● 0: Off
● 1: On
emp string Shows whether Enclosure Management Processor debug messages are enabled
for inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
emp-numeric uint32 Numeric equivalents for emp values.
312 API basetype properties