CLI Guide

Table 27. debug-log-parameters properties (continued)
Name Type Description
fruid string Shows whether FRU ID debug messages are enabled for inclusion in the Storage
Controller debug log.
● Off: Disabled.
● On: Enabled.
fruid-numeric uint32 Numeric equivalents for fruid values.
● 0: Off
● 1: On
resmgr string Shows whether Reservation Manager debug messages are enabled for inclusion
in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
resmgr-numeric uint32 Numeric equivalents for resmgr values.
● 0: Off
● 1: On
init string Shows whether host-port initiator mode debug messages are enabled for
inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
init-numeric uint32 Numeric equivalents for init values.
● 0: Off
● 1: On
ps string Shows whether paged storage debug messages are enabled for inclusion in the
Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
ps-numeric uint32 Numeric equivalents for ps values.
● 0: Off
● 1: On
cache2 string Shows whether extra cache debugging messages that may occur frequently
enough to fill logs are enabled for inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
cache2-numeric uint32 Numeric equivalents for cache2 values.
● 0: Off
● 1: On
rtm string Shows whether Remote Target Manager debug messages are enabled for
inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
rtm-numeric uint32 Numeric equivalents for rtm values.
● 0: Off
● 1: On
hb string Shows whether inter-controller heartbeat debug messages are enabled for
inclusion in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
hb-numeric uint32 Numeric equivalents for hb values.
314 API basetype properties