CLI Guide

Table 27. debug-log-parameters properties (continued)
Name Type Description
● 0: Off
● 1: On
autotest string Shows whether auto-test debug messages are enabled for inclusion in the
Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
autotest-numeric uint32 Numeric equivalents for autotest values.
● 0: Off
● 1: On
cs string Shows whether Copy Services feature debug messages are enabled for inclusion
in the Storage Controller debug log.
● Off: Disabled.
● On: Enabled.
cs-numeric uint32 Numeric equivalents for cs values.
● 0: Off
● 1: On
disk-groups
This basetype is used by show configuration on page 173, show disk-groups on page 178, and show pools
on page 219.
Table 28. disk-groups properties
Name Type Description
name string The name of the disk group.
url string Disk group URL.
blocksize uint32 The size of a block, in bytes.
size string Disk group capacity, formatted to use the current base, precision, and units.
size-numeric uint64 Unformatted size value in blocks.
freespace string The amount of free space in the disk group, formatted to use the current base,
precision, and units.
freespace-numeric uint64 Unformatted freespace value in blocks.
raw-size string The raw capacity of the disks in the disk group, irrespective of space reserved
for RAID overhead and so forth, formatted to use the current base, precision, and
units.
raw-size-numeric uint64 Unformatted raw-size value in blocks.
storage-type string
● Linear: The disk group acts as a linear pool.
● Virtual: The disk group is in a virtual pool.
storage-type-numeric uint32 Numeric equivalents for storage-type values.
● 0: Linear
● 1: Virtual
pool string The name of the pool that contains the disk group.
pools-url string Pool URL.
pool-serial-number string The serial number of the pool that contains the disk group.
API basetype properties 315