CLI Guide

Table 35. drawers properties (continued)
Name Type Description
status string Drawer status.
● Unsupported
● OK
● Critical
● Warning
● Unrecoverable
● Not Installed
● Unknown
● Unavailable
status-numeric uint32 Numeric equivalents for status values.
● 0: Unsupported
● 1: OK
● 2: Critical
● 3: Warning
● 4: Unrecoverable
● 5: Not Installed
● 6: Unknown
● 7: Unavailable
extended-status hex32 A numeric value that supplements the standard SES status shown by the
status and status-numeric properties, and represents a specific condition.
health string
● OK
● Degraded
● Fault
● N/A
● Unknown
health-numeric uint32 Numeric equivalents for health values.
● 0: OK
● 1: Degraded
● 2: Fault
● 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unhealthy component Embedded; see unhealthy-component on page 415.
sideplane-details Embedded; see sideplanes on page 397.
drive-parameters
This basetype is used by show disk-parameters on page 183.
Table 36. drive-parameters properties
Name Type Description
smart string Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is
enabled or disabled for disks.
● Detect-Only: Each disk in the system retains its individual SMART setting,
as will new disks added to the system.
● Enabled: SMART is enabled for all disks in the system and will be enabled for
new disks added to the system.
328 API basetype properties