CLI Guide

Table 38. drives properties (continued)
Name Type Description
NOTE: ME4 Series systems support only dual-ported disks.
single-ported-numeric uint32 Numeric equivalents for single-ported values.
● 0: Disabled
● 1: Enabled
NOTE: ME4 Series systems support only dual-ported disks.
type string Type of disk.
● SAS: Enterprise SAS.
● SAS MDL: Midline SAS.
● sSAS: SAS SSD.
type-numeric uint32 Numeric equivalents for type values.
● 4: SAS
● 8: sSAS
● 11: SAS MDL
usage string Shows the usage of the disk.
● AVAIL: The disk is available.
● DEDICATED SP: The disk is a spare assigned to a linear disk group.
● FAILED: The disk is unusable and must be replaced. Reasons for this
status include: excessive media errors, SMART error, disk hardware failure,
or unsupported disk.
● GLOBAL SP: The disk is a global spare.
● LEFTOVR: The disk is a leftover.
● LINEAR POOL: The disk is a member of a linear disk group.
● UNUSABLE: The disk cannot be used in a disk group because the system is
secured or the disk is locked to data access.
● VDISK: The disk is a member of a linear disk group.
● VDISK SP: The disk is a spare assigned to a linear disk group.
● VIRTUAL POOL: The disk is a member of a disk group in a virtual pool.
usage-numeric uint32 Numeric equivalents for usage values.
● 0: AVAIL
● 1: VDISK or LINEAR POOL
● 2: VDISK SP or DEDICATED SP
● 3: GLOBAL SP
● 5: LEFTOVR
● 7: FAILED
● 8: UNUSABLE
● 9: VIRTUAL POOL
smart-numeric uint32 Numeric equivalents for smart values.
● 0: Disabled
● 1: Enabled
dual-port uint32
● 0: Single-ported disk.
● 1: Dual-ported disk.
NOTE: ME4 Series systems support only dual-ported disks.
error uint32 Not used.
fc-p1-channel uint32 Port 1 channel ID.
fc-p1-device-id uint32 Port 1 device ID.
API basetype properties 331