CLI Guide
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System CLI Guide
- Contents
- Using the CLI
- Categorical list of commands
- Alphabetical list of commands
- abort copy
- abort replication
- abort scrub
- abort verify
- add disk-group
- add host-group-members
- add host-members
- add ipv6-address
- add spares
- add storage
- add volume-group-members
- check firmware-upgrade-health
- check support-assist
- clear cache
- clear disk-metadata
- clear dns-parameters
- clear events
- clear expander-status
- clear fde-keys
- clear fenced-data
- clear replication-queue
- clear support-assist-proxy
- copy volume
- create certificate
- create chap-record
- create host
- create host-group
- create peer-connection
- create replication-set
- create schedule
- create snapshots
- create task
- create user
- create vdisk
- create volume
- create volume-group
- create volume-set
- delete all-snapshots
- delete chap-records
- delete host-groups
- delete hosts
- delete initiator-nickname
- delete peer-connection
- delete pools
- delete remote-system
- delete replication-set
- delete schedule
- delete snapshot
- delete task
- delete user
- delete vdisks
- delete volume-groups
- delete volumes
- dequarantine
- exit
- expand disk-group
- expand vdisk
- expand volume
- fail
- help
- map volume
- meta
- ping
- query peer-connection
- recover replication-set
- release volume
- remove disk-groups
- remove host-group-members
- remove host-members
- remove ipv6-address
- remove spares
- remove volume-group-members
- replicate
- rescan
- reset all-statistics
- reset controller-statistics
- reset disk-error-statistics
- reset disk-group-statistics
- reset disk-statistics
- reset dns-management-hostname
- reset host-link
- reset host-port-statistics
- reset pool-statistics
- reset smis-configuration
- reset snapshot
- reset vdisk-statistics
- reset volume-statistics
- restart mc
- restart sc
- restore defaults
- resume replication-set
- rollback volume
- scrub disk-groups
- scrub vdisk
- scrub volume
- send support-assist-logs
- set advanced-settings
- set chap-record
- set cli-parameters
- set cloud-iq
- set controller-date
- set debug-log-parameters
- set disk
- set disk-group
- set disk-parameters
- set dns-management-hostname
- set dns-parameters
- set email-parameters
- set enclosure
- set expander-fault-isolation
- set expander-phy
- set fde-import-key
- set fde-lock-key
- set fde-state
- set host
- set host-group
- set host-parameters
- set host-port-mode
- set initiator
- set ipv6-network-parameters
- set iscsi-parameters
- set led
- set network-parameters
- set ntp-parameters
- set password
- set peer-connection
- set pool
- set prompt
- set protocols
- set replication-set
- set schedule
- set snapshot-space
- set snmp-parameters
- set support-assist
- set support-assist-info
- set support-assist-proxy
- set syslog-parameters
- set system
- set task
- set user
- set vdisk
- set volume
- set volume-cache-parameters
- set volume-group
- show advanced-settings
- show cache-parameters
- show certificate
- show chap-records
- show cli-parameters
- show cloud-iq
- show configuration
- show controller-date
- show controllers
- show controller-statistics
- show debug-log-parameters
- show disk-groups
- show disk-group-statistics
- show disk-parameters
- show disks
- show disk-statistics
- show dns-management-hostname
- show dns-parameters
- show email-parameters
- show enclosures
- show events
- show expander-status
- show fan-modules
- show fans
- show fde-state
- show fenced-data
- show frus
- show host-groups
- show host-phy-statistics
- show host-port statistics
- show initiators
- show inquiry
- show ipv6-addresses
- show ipv6-network-parameters
- show iscsi-parameters
- show license
- show maps
- show network-parameters
- show ntp-status
- show peer-connections
- show pools
- show pool-statistics
- show ports
- show power-supplies
- show protocols
- show provisioning
- show redundancy-mode
- show refresh-counters
- show remote-systems
- show replication-sets
- show replication-snapshot-history
- show sas-link-health
- show schedules
- show sensor-status
- show service-tag-info
- show sessions
- show shutdown-status
- show snapshot-space
- show snapshots
- show snmp-parameters
- show support-assist
- show syslog-parameters
- show system
- show system-parameters
- show tasks
- show tiers
- show tier-statistics
- show unwritable-cache
- show users
- show vdisks
- show vdisk-statistics
- show versions
- show volume-copies
- show volume-groups
- show volume-names
- show volume-reservations
- show volume-statistics
- show volumes
- shutdown
- suspend replication-set
- test
- trust
- unfail controller
- unmap volume
- verify disk-groups
- verify links
- verify vdisk
- API basetype properties
- adapt-expand-preview
- advanced-settings-table
- cache-parameter
- cache-settings
- certificate-status
- chap-records
- cli-parameters
- cloud-iq
- code-load-readiness
- code-load-readiness-reasons
- communication-ports
- compact-flash
- contact-information
- controller-cache-parameters
- controllers
- controller-statistics
- copy-volumes
- cs-replicate-tasks
- cs-replication
- cs-replication-set
- current-replication-snapshots
- debug-log-parameters
- disk-groups
- disk-groups-preview
- disk-group-statistics
- disk-group-statistics-paged
- disk-hist-statistics
- disk-statistics
- dns-parameters
- drawers
- drive-parameters
- drive-summary
- drives
- email-parameters
- enclosure-fru
- enclosure-list
- enclosures
- events
- eventsLogs
- expander-ports
- expander-versions
- expanders
- fan
- fan-module-versions
- fan-modules
- fc-port
- fde-state
- fenced-data
- fru-versions
- host
- host-group
- host-group-view
- host-port-statistics
- host-view-mappings
- initiator
- initiator-view
- inquiry
- io-modules
- iom-versions
- ipv6-network-parameters
- iscsi-parameters
- iscsi-port
- license
- local-ports
- local-ports-detail
- log-header-table
- mgmt-hostnames
- midplane-versions
- network-parameters
- ntp-status
- peer-connection-info
- peer-connections
- peer-controllers
- peer-ports
- pool-hist-statistics
- pool-statistics
- pool-summary
- pools
- port
- power-supplies
- product-info
- provisioning
- proxy-information
- psu-versions
- readcache-hist-statistics
- redundancy
- refresh-counters
- remote-ports
- remote-ports-detail
- remote-system
- replication-snapshot-history
- reset-snapshot-tasks
- resettable-statistics
- sas-host-phy-statistics
- sas-port
- sas-status-controller-a
- sas-status-drawer
- schedules
- security-communications-protocols
- sensors
- service-tag-info
- sessions
- show-other-MC-status
- shutdown-status
- sideplanes
- snap-space
- snapshots
- snapshot-with-retention-tasks
- snap-tasks
- snmp-parameters
- spares-preview
- status
- storage-preview
- support-assist
- syslog-parameters
- system
- system-parameters-table
- tasks
- tier-hist-statistics
- tier-statistics
- tier-summary
- tiers
- time-settings-table
- unhealthy-component
- unused-disks-preview
- unwritable-cache
- users
- vdisk-hist-statistics
- vdisk-statistics
- versions
- virtual-disk-summary
- virtual-disks
- volume-groups
- volume-group-view
- volume-group-view-mappings
- volume-names
- volume-reservations
- volumes
- volume-statistics
- volume-view
- volume-view-mappings
- Settings changed by restore defaults
Table 38. drives properties (continued)
Name Type Description
attributes-numeric uint32 For internal use only.
enclosure-wwn string Enclosure WWN.
enclosures-url string Enclosure URL.
status string Disk status.
● Up: The disk is present and is properly communicating with the expander.
● Spun Down: The disk is present and has been spun down by the drive spin
down feature.
● Warning: The disk is present but the system is having communication
problems with the disk LED processor. For disk and midplane types where
this processor also controls power to the disk, power-on failure will result in
Error status.
● Error: The disk is present but is not detected by the expander.
● Unknown: Initial status when the disk is first detected or powered on.
● Not Present: The disk slot indicates that no disk is present.
● Unrecoverable: The disk is present but has unrecoverable errors.
● Unavailable: The disk is present but cannot communicate with the
expander.
● Unsupported: The disk is present but is an unsupported type.
recon-state string The state of the disk (source or destination) if it is involved in a reconstruct
operation.
● From: This disk is being used as the source of a reconstruct operation.
● To: This disk is being used as the target of a reconstruct operation.
● N/A: This disk is not being used in a reconstruct operation.
recon-state-numeric uint32 Numeric equivalents for recon-state values.
● 0: N/A
● 1: From
● 2: To
disk-dsd-count uint32 Number of times the DSD feature has spun down this disk.
spun-down uint32 Shows whether the disk is spun down by the DSD feature.
● 0: Not spun down.
● 1: Spun down.
number-of-ios uint64 Total number of I/O operations (reads and writes).
total-data-transferred string The total number of bytes transferred.
total-data-transferred-
numeric
uint64 Unformatted total-data-transferred value.
avg-rsp-time uint64 Average I/O response time in microseconds.
fde-state string The FDE state of the disk.
● Unknown: The FDE state is unknown.
● Not FDE Capable: The disk is not FDE-capable.
● Not Secured: The disk is not secured.
● Secured, Unlocked: The system is secured and the disk is unlocked.
● Secured, Locked: The system is secured and the disk is locked to data
access, preventing its use.
● FDE Protocol Failure: A temporary state that can occur while the
system is securing the disk.
fde-state-numeric uint32 Numeric equivalents for fde-state values.
● 0: Not FDE Capable
API basetype properties 333