CLI Guide

enclosures
This basetype is used by show configuration on page 173 and show enclosures on page 196.
Table 42. enclosure properties
Name Type Description
durable-id string Enclosure ID in the format enclosure_number.
enclosure-id uint8 Enclosure ID.
enclosure-wwn string Enclosure WWN.
name string Enclosure name.
type string Internal name for the enclosure type.
type-numeric uint32 Numeric equivalents for type values.
iom-type string I/O module type.
iom-type-numeric uint32 Numeric equivalents for iom-type values.
platform-type string Hardware platform type.
platform-type-numeric uint32 Numeric equivalents for platform-type values.
board-model string Board model.
board-model-numeric uint32 Numeric equivalents for board-model values.
location string Enclosure location, or blank if not set.
rack-number uint8 Number of the rack that contains the enclosure.
rack-position uint8 Position of the enclosure in the rack.
number-of-coolings-elements uint8 Number of fan units in the enclosure.
number-of-disks uint8 Number of disk slots (not installed disks) in the enclosure.
number-of-power-supplies uint8 Number of power supplies in the enclosure.
status string Enclosure status.
● Unsupported
● OK
● Critical
● Warning
● Unrecoverable
● Not Installed
● Unknown
● Unavailable
status-numeric uint32 Numeric equivalents for status values.
● 0: Unsupported
● 1: OK
● 2: Critical
● 3: Warning
● 4: Unrecoverable
● 5: Not Installed
● 6: Unknown
● 7: Unavailable
extended-status hex32 A numeric value that supplements the standard SES status shown by the
status and status-numeric properties, and represents a specific condition.
● 0x01: IOM A incompatible
API basetype properties 339