CLI Guide

Table 45. expander-ports properties (continued)
Name Type Description
sas-port-index uint32 The expander port index. For an IOM with two expansion ports, this value
differentiates the two egress ports (0–1) and two ingress ports (0–1) for each
path A and B. This value is appended to the port’s durable-id value.
name string
● Out Port: Egress (expansion) port on controller module or an expansion
module. Can be connected to an ingress port in an expansion module.
● In Port: Ingress port on an expansion module. Can be connected to an
egress (expansion) port in a controller module or an expansion module.
● Universal Port: Port that can function as either an egress or ingress port
in a controller module or an expansion module.
status string Expander port status.
● Up: The port is cabled and has an I/O link.
● Warning: Not all of the port PHYs are up.
● Error: The port is reporting an error condition.
● Not Present: The controller module is not installed or is down.
● Disconnected: Either no I/O link is detected or the port is not cabled.
status-numeric uint32 Numeric equivalents for status values.
● 0: Up
● 1: Warning
● 2: Error
● 3: Not Present
● 4: Unknown
● 6: Disconnected
health string
● OK
● Degraded
● Fault
● N/A
● Unknown
health-numeric uint32
Numeric equivalents for health values.
● 0: OK
● 1: Degraded
● 2: Fault
● 3: Unknown
● 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
expander-versions
This basetype is used by show versions on page 264 when the frus parameter is specified.
Table 46. expander-versions properties
Name Type Description
name string Expansion IOM name in the format IOM enclosure-ID, position.
location string Expander location in the format Enclosure enclosure-ID, IOM I/O-module- ID.
enclosure-id uint32 Enclosure ID.
344 API basetype properties