CLI Guide

Table 46. expander-versions properties (continued)
Name Type Description
drawer-id uint8
● 0: Top
● 1: Bottom
expander-id uint8 Expander ID.
controller string
● A: Controller A.
● B: Controller B.
controller-numeric uint32 Numeric equivalents for controller values.
● 0: B
● 1: A
fw-revision string lOM firmware version, short form.
fw-revision-full string IOM firmware version, long form.
vpd-format-version string Vital Product Data (VPD) version.
vpd-crc string VPD CRC.
cfg-format-version string Configuration format version.
cfg-crc string CFG CRC.
bootloader-version string Boot loader version.
cpld-version string Complex Programmable Logic Device (CPLD) firmware version
expanders
This basetype is used by show enclosures on page 196.
Table 47. expanders properties
Name Type Description
durable-id string Expander ID.
enclosure-id uint32 Enclosure ID.
drawer-id
(5U84 enclosure)
uint8
● 0: Top
● 1: Bottom
drawer-id
(2U12/24 enclosure)
uint8 Not applicable (255).
dom-id uint32 The expander position, shown as an index value that starts at 0 and increments
from left to right as viewed from the back of the enclosure.
path-id string
● A: Controller A.
● B: Controller B.
path-id-numeric uint32 Numeric equivalents for path-id values.
● 0: B
● 1: A
name string Expander name.
location string Expander location.
status string Expander status.
● Unsupported
● OK
API basetype properties 345