CLI Guide

Table 47. expanders properties (continued)
Name Type Description
● Critical
● Warning
● Unrecoverable
● Not Installed
● Unknown
● Unavailable
status-numeric uint32 Numeric equivalents for status values.
● 0: Unsupported
● 1: OK
● 2: Critical
● 3: Warning
● 4: Unrecoverable
● 5: Not Installed
● 6: Unknown
● 7: Unavailable
extended-status hex32 Always 0 for this component.
fw-revision string Expander firmware revision.
health string
● OK
● Degraded
● Fault
● N/A
● Unknown
health-numeric uint32 Numeric equivalents for health values.
● 0: OK
● 1: Degraded
● 2: Fault
● 3: N/A
● 4: Unknown
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component on page 415.
sas-port-details Embedded; see expander-ports on page 343.
fan
This basetype is used by show fans on page 202 and show power-supplies on page 227.
Table 48. fan properties
Name Type Description
durable-id string Fan ID.
name string Fan name.
location string Fan location.
status-ses string Fan status.
● Unsupported
346 API basetype properties