CLI Guide

Table 48. fan properties (continued)
Name Type Description
● OK
● Critical
● Warning
● Unrecoverable
● Not Installed
● Unknown
● Unavailable
status-ses-numeric uint32 Numeric equivalents for status-ses values.
● 0: Unsupported
● 1: OK
● 2: Critical
● 3: Warning
● 4: Unrecoverable
● 5: Not Installed
● 6: Unknown
● 7: Unavailable
extended-status hex32 A numeric value that provides additional information to supplement the standard
SES status shown by the status and status-numeric properties. The
extended-status value is a bitwise value computed from the values of five
status bits, and may be one of the following values or a combination of these
values.
● 1: The device has reported a failure.
● 2: The device is off.
● 4: The device FRU is not installed.
● 8: The device status cannot be determined.
● 16: The device is requested to be on (not off). This is the default status and
represents normal operation.
● 17: Device has failed.
● 18: Device is off.
● 19: Device has failed and is off.
● 24: Device status is unknown, which could represent an I2C communication
issue.
status string Fan unit status.
● Up
● Error
● Off
● Missing
status-numeric uint32 Numeric equivalents for status values.
● 0: Up
● 1: Error
● 2: Off
● 3: Missing
speed uint32 Fan speed (revolutions per minute).
position string Fan position, as viewed from the back of the enclosure.
● Left
● Right
● N/A
position-numeric uint32 Numeric equivalents for position values.
● 0: Left
API basetype properties 347