CLI Guide

Table 50. fan-modules properties (continued)
Name Type Description
health-recommendation string If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component on page 415.
fan-details Embedded; see fan on page 346.
fc-port
This basetype is used by show ports on page 225 for a Fibre Channel port.
Table 51. fc-port properties
Name Type Description
configured-topology string Configured topology.
● Loop : Fibre Channel arbitrated loop (public or private).
● PTP : Fibre Channel point-to-point.
● Auto : Loop preferred, otherwise point-to-point, based on the detected
connection type.
configured-topology-numeric uint32 Numeric equivalents for configured-topology values.
● 0: Loop
● 1 : PTP
● 2: Auto
primary-loop-id string If the port is using loop topology and the port status is Up, this field shows the
primary loop ID. If the port is not using loop topology or the port status is not Up,
this field shows N/A.
sfp-status string SFP status.
● OK
● Not present : No SFP is inserted in this port.
● Not compatible : The SFP in this port is not qualified for use in this
system. When this condition is detected, event 464 is logged.
● Incorrect protocol : The SFP protocol does not match the port
protocol. When this condition is detected, event 464 is logged.
sfp-status-numeric uint32 Numeric equivalents for sfp-status values.
● 0 : Not compatible
● 1 : Incorrect protocol
● 2 : Not present
● 3 : OK
sfp-present string Shows whether the port contains an SFP.
● Not Present
● Present
sfp-present-numeric uint32 Numeric equivalents for sfp-present values.
● 0: Not Present
350 API basetype properties