CLI Guide

Table 58. host-port-statistics properties (continued)
Name Type Description
reset-time-numeric uint32 Unformatted reset-time value.
start-sample-time string Date and time, in the format year-month-day hour:minutes:seconds,
when sampling started for the iops and bytes-per-second values.
start-sample-time-numeric uint32 Unformatted start-sample-time value.
stop-sample-time string Date and time, in the format year-month-day hour:minutes:seconds,
when sampling stopped for the iops and bytes-per-second values.
stop-sample-time-numeric uint32 Unformatted stop-sample-time value.
host-view-mappings
This basetype is used by show maps on page 214 when the initiator parameter is specified.
Table 59. host-view-mappings properties
Name Type Description
volume-name string Volume name.
volume-serial string Volume serial number.
lun string LUN assigned to the mapping.
access string Type of host access to the volume.
● read-write: Read and write
● read-only: Read only
● no-access: No access (masked)
● not-mapped: Not mapped
access-numeric uint32 Numeric equivalents of access values.
● 0: not-mapped
● 1: no-access
● 2: read-only
● 3: read-write
ports string Controller host ports assigned to the mapping.
initiator
This basetype is used by show initiators on page 210.
Table 60. initiator properties
Name Type Description
durable-id string Initiator ID.
nickname string The nickname of the initiator, or blank.
discovered string
● Yes: The initiator was discovered and its entry was automatically created.
● No: The initiator was manually created.
mapped string
● Yes: At least one volume is explicitly mapped to the initiator.
● No: No volumes are explicitly mapped to the initiator.
profile string Standard : Default profile.
profile-numeric uint32 Numeric equivalents of profile values.
354 API basetype properties