CLI Guide

Table 60. initiator properties (continued)
Name Type Description
● 0: Standard
host-bus-type string
● If the host was discovered and its entry was automatically created, its host
interface type: FC, iSCSI, SAS.
● If the host entry was manually created: Undefined.
host-bus-type- numeric uint32 Numeric equivalents of host-bus-type values.
● 0: UNKNOWN
● 6: FC
● 8: SAS
● 9: iSCSI
id string
● For an FC initiator, its WWPN.
● For a SAS initiator, its WWPN.
● For an iSCSI initiator, its node name (typically the IQN).
host-id string If the initiator is a member of a host, the serial number of the host. Otherwise,
NOHOST.
host-key string If the initiator is a member of a host, the durable ID of the host. Otherwise, HU.
host-port-bits-a uint32 For internal use only.
host-port-bits-b uint32 For internal use only.
initiator-view
This basetype is used by show maps on page 214 when the initiator parameter is specified.
Table 61. initiator-view properties
Name Type Description
id string
● For an FC initiator, its WWPN.
● For a SAS initiator, its WWPN.
● For an iSCSI initiator, its node name (typically the IQN).
hba-nickname string The nickname of the initiator.
host-profile string Standard: Default profile.
host-profile-numeric uint32 Numeric equivalents of host-profile values.
● 0: Standard
host-view-mappings Embedded; see host-view-mappings on page 354.
inquiry
This basetype is used by show inquiry on page 211.
Table 62. inquiry properties
Name Type Description
mc-fw string Management Controller firmware version.
mc-loader string Management Controller loader firmware version.
sc-fw string Storage Controller firmware version.
sc-loader string Storage Controller loader firmware version.
API basetype properties 355