CLI Guide

Table 63. io-modules properties (continued)
Name Type Description
● Left
● Right
● Top
● Bottom
position-numeric uint32 Numeric equivalents for position values.
● 0: Left
● 1: Right
● 2: Top
● 3: Bottom
rotation string Rotation of the controller module in the enclosure.
● 0 Degrees
● 90 Degrees
● 180 Degrees
● 270 Degrees
rotation-numeric string Numeric equivalents for position values.
● 0: 0 Degrees
● 1: 90 Degrees
● 2: 180 Degrees
● 3: 270 Degrees
configuration-serialnumber string Configuration serial number.
phy-isolation string Shows whether the automatic disabling of SAS expander PHYs having high error
counts is enabled or disabled for this controller.
● Enabled: PHY fault isolation is enabled.
● Disabled: PHY fault isolation is disabled.
phy-isolation-numeric uint32 Numeric equivalents for phy-isolation values.
● 0: Enabled
● 1: Disabled
locator-led string Shows the state of the locator LED on an expansion module.
● Off
● On
locator-led-numeric uint32 Numeric equivalents for locator-led values.
● 0: Off
● 1: On
status string
● Operational
● Down
● Not installed
● Unknown
status-numeric uint32 Numeric equivalents for status values.
● 0: Operational
● 1: Down
● 2: Not installed
● 3: Unknown
health string
● OK
● Degraded
● Fault
● N/A
API basetype properties 357