CLI Guide

peer-connections
This basetype is used by show peer-connections on page 217.
Table 77. peer-connections properties
Name Type Description
peer-connection-name string The name of the peer connection.
serial-number string The serial number of the peer connection.
connection-type string The type of ports being used for the peer connection:
● FC
● iSCSI
connection-type-numeric uint32 Numeric equivalents for connection-type values.
● 1: FC
● 2: iSCSI
connection-status string
● Online: The systems have a valid connection.
● Offline: No connection is available to the remote system.
connection-status-numeric uint32 Numeric equivalents for connection-status values.
health string
● OK
● Fault
● Unknown
health-numeric uint32 Numeric equivalents for health values.
● 0: OK
● 1: Degraded
● 2: Fault
● 3: Unknown
● 4: N/A
health-reason string If Health is not OK, this field shows the reason for the health state.
health-recommendation string If Health is not OK, this field shows recommended actions to take to resolve the
health issue.
local-ports Embedded; see local-ports on page 364.
remote-ports Embedded; see remote-ports on page 383.
peer-controllers
This basetype is used by query peer-connection on page 87.
Table 78. peer-controllers properties
Name Type Description
controller string
● A: Controller A.
● B: Controller B.
controller-numeric uint32 Numeric equivalents for controller values.
● 0: A
● 1: B
sc-fw string Storage Controller firmware version.
sc-loader string Storage Controller loader firmware version.
368 API basetype properties