CLI Guide

Table 83. pools properties (continued)
Name Type Description
● 3: Unknown
● 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
disk-groups Embedded; see disk-groups on page 315.
tiers Embedded; see tiers on page 413.
unhealthy-component Embedded; see unhealthy-component on page 415.
port
This basetype is used by show configuration on page 173 and show ports on page 225.
Table 84. port properties
Name Type Description
durable-id string Controller host port ID in the format hostport_controller-ID-and-port-
number.
controller string
● A : Controller A.
● B : Controller B.
controller-numeric uint32 Numeric equivalents for controller values.
● 0: B
● 1: A
port string Controller ID and port number.
port-type string
● FC : Fibre Channel.
● iSCSI : Internet SCSI.
● SAS : Serial Attached SCSI.
port-type-numeric uint32 Numeric equivalents for port-type values.
● 0: UNKNOWN
● 6: FC
● 8: SAS
● 9: iSCSI
media string
● FC(P) : Fibre Channel Point-to-Point.
● FC(L) : Fibre Channel-Arbitrated Loop (public or private).
● FC(-) : Not applicable, as when the port is disconnected.
● SAS : Serial Attached SCSI.
● iSCSI : Internet SCSI.
target-id string
● For an FC port, its WWPN.
● For a SAS port, its WWPN.
● For an iSCSI port, its node name (typically the IQN).
status string Port status.
● Up : The port is cabled and has an I/O link.
● Warning : Not all of the port's PHYs are up.
● Error : The port is reporting an error condition.
● Not Present : The controller module is not installed or is down
● Disconnected : Either no I/O link is detected or the port is not cabled.
API basetype properties 375