CLI Guide

Table 84. port properties (continued)
Name Type Description
● 2: Fault
● 3: Unknown
● 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK , the recommended actions to take to resolve the health issue.
port-details Embedded; see fc-port on page 350, iscsi-port on page 360, sas-port on page 387
power-supplies
This basetype is used by show power-supplies on page 227.
Table 85. power-supplies properties
Name Type Description
durable-id string Power supply ID in the format psu_enclosure-ID.power-supply-number.
enclosure-id uint32 Enclosure ID.
dom-id uint32 The power supply position, shown as an index value that starts at 0 and
increments from left to right as viewed from the back of the enclosure.
serial-number string Power supply serial number.
part-number string FRU part number.
description string FRU long description.
name string Power supply identifier and location.
fw-revision string
● (blank): Not applicable.
● Firmware revision of the power supply.
revision string FRU hardware revision level.
model string Power supply model.
vendor string Power supply vendor.
location string Power supply location in the format Enclosure enclosure-ID - position ,
where the position is as viewed from the back of the enclosure.
position string Power supply position, as viewed from the back of the enclosure.
● Left
● Right
● Top
● Bottom
position-numeric uint32 Numeric equivalents for position values.
● 0: Left
● 1: Right
● 2: Top
● 3: Bottom
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), when the power supply module was manufactured.
API basetype properties 377