CLI Guide

Table 104. sensors properties (continued)
Name Type Description
● B : Controller B.
● both : Both controllers.
● N/A
controller-id-numeric uint32 Numeric equivalents for controller-id values.
● 0: B
● 1: A
● 2: both
● N/A
sensor-name string Sensor name and location.
value string
● For a sensor, its value.
● For overall unit status, one of the status values below.
status string
● OK : The sensor is present and detects no error condition.
● Warning : The sensor detected a non-critical error condition. Temperature,
voltage, or current is between the warning and critical thresholds.
● Critical : The sensor detected a critical error condition. Temperature,
voltage, or current exceeds the critical threshold.
● Unavailable : The sensor is present with no known errors, but has not
been turned on or set into operation because it is initializing. This typically
occurs during controller startup.
● Unrecoverable : The enclosure management processor (EMP) cannot
communicate with the sensor.
● Unknown : The sensor is present but status is not available.
● Not Installed : The sensor is not present.
● Unsupported : Status detection is not implemented.
status-numeric uint32 Numeric equivalents for status values.
● 0: Unsupported
● 1: OK
● 2: Critical
● 3: Warning
● 4: Unrecoverable
● 5: Not Installed
● 6: Unknown
● 7: Unavailable
sensor-location uint32 Superseded by the container property.
container string Hardware component that contains the sensor.
● controllers
● enclosures
● fan
● iom
● midplane
● power-supplies
container-numeric uint32 Numeric equivalents for container values.
● 17: enclosures
● 18: midplane
● 19: controllers
● 20: iom
● 21: power-supplies
● 22: fan
394 API basetype properties