CLI Guide

Table 114. snmp-parameters properties
Name Type Description
snmp-enabled string Shows whether the Simple Network Management Protocol (SNMP) interface is
enabled or disabled.
● Disabled—SNMP is disabled.
● Enabled—SNMP is enabled.
snmp-enabled- numeric uint32 Numeric equivalents for snmp-enabled values.
● 0: Disabled
● 1: Enabled
snmp-filter string Minimum level of events to include for SNMP traps
● crit—Sends notifications for Critical events only.
● error—Sends notifications for Error and Critical events.
● warn—Sends notifications for Warning, Error, and Critical events.
● resolved—Sends notifications for Resolved, Warning, Error, and Critical
events.
● info—Sends notifications for all events.
● none—No events are sent as traps and traps are disabled.
snmp-filter- numeric uint32 Numeric equivalents for snmp-filter values.
● 0: info
● 1: resolved
● 2: warn
● 3: error
● 4: crit
● 5: none
snmp-trap-host-1 string Trap host IP address.
snmp-trap-host-2 string Trap host IP address.
snmp-trap-host-3 string Trap host IP address.
snmp-read- community string The community string for read-only access. The value is obscured for users
having only the monitor role and is shown in clear text for users having the
manage role.
snmp-write- community string The community string for write access. The value is obscured for users having
only the monitor role and is shown in clear text for users having the
managerole.
spares-preview
This basetype is used by add storage on page 36 when the preview parameter is specified.
Table 115. spares-preview properties
Name Type Description
location string Disk enclosure ID and slot number.
type string Disk description.
● SAS: Enterprise SAS spinning disk.
● SAS MDL: Midline SAS spinning disk.
● SSD SAS: SAS solid-state disk.
type-numeric uint32 Numeric equivalents for description values.
● 4: SAS
● 8: SSD SAS
402 API basetype properties