CLI Guide

Parameters
disks
The IDs of the leftover disks from which to clear metadata. For disk syntax, see Command syntax.
Examples Clear metadata from leftover disk 1.1.
# clear disk-metadata 1.1
See also show disks
clear dns-parameters
Description Clears configured DNS settings for each controller module.
Minimum role manage
Syntax
clear dns-parameters
[controller a|b|both]
Parameters
controller a|b|both
Optional. Specifies whether to change controller A, B, or both. If this parameter is omitted, changes
affect the controller being accessed.
Examples Clear DNS settings for controller A.
# clear dns-parameters controller a
See also
set dns-parameters
set email-parameters
show dns-parameters
show email-parameters
clear events
Description
Clears the event log in controller A, B, or both.
Minimum role manage
Syntax
clear events
[a|b|both]
Parameters
[a|b|both]
Optional. The controller event log to clear. If this parameter is omitted, both event logs are cleared.
Examples Clear the event log for controller A.
# clear events a
See also show events
clear expander-status
Description
Clears the counters and status for SAS expander lanes.
NOTE: This command is for use by or with direction from technical support.
Counters and status can be reset to a good state for all enclosures, or for a specific enclosure whose
status is Error as shown by the show expander-status command.
Alphabetical list of commands 41