CLI Guide

Table 121. system-parameters-table properties (continued)
Name Type Description
● 0: False
● 1: True
max-adapt-drives-per-disk-
group
uint32 The maximum number of disks that an ADAPT disk group can contain.
min-adapt-drives-per-disk-
group
uint32 The minimum number of disks that an ADAPT disk group can contain.
max-adapt-disk-groups-per-
system
uint32 The maximum number of ADAPT disk groups that the system supports.
max-adapt-drives-per-
expansion
uint32 The maximum number of disks by which an ADAPT disk group can be expanded.
tasks
This basetype is used by show tasks.
Table 122. tasks properties
Name Type Description
name string Task name.
type string Type of operation this task performs.
● TakeSnapshot
● ResetSnapshot
● Replicate
● EnableDSD
● DisableDSD
status string Task status.
● Uninitialized: Task is not yet ready to run.
● Ready: Task is ready to run.
● Active: Task is running.
● Error: Task has an error.
● Complete: For a TakeSnapshot task only, the task is complete but not yet
ready to run again.
● Deleted: The task is expired but this state is not yet synchronized to the
partner controller.
state string Current step of the task.
● For an EnableDSD or DisableDSD task:
○ Start
● For a TakeSnapshot task:
○ Start
○ VerifyVolume
○ ValidateLicensingLimit
○ CreateName
○ CreateSnap
○ VerifySnap
○ InspectRetention
○ FindOldestSnap
○ UnmapSnap
○ ResetSnap
410 API basetype properties