CLI Guide

Table 126. tiers properties (continued)
Name Type Description
tier-numeric uint32 Numeric equivalents for tier values.
● 0: N/A
● 1: Performance
● 2: Standard
● 4: Archive
● 8: Read Cache
pool-percentage uint8 The percentage of pool capacity that the tier occupies.
diskcount uint8 The number of disks in the tier.
raw-size string The raw capacity of the disks in the tier, irrespective of space reserved
for RAID overhead and so forth, formatted to use the current base,
precision, and units.
raw-size-numeric uint64 Unformatted raw-size value in blocks.
total-size string The total capacity of the tier.
total-size-numeric uint64 Unformatted total-size value in blocks.
allocated-size string The amount of space currently allocated to volumes in the tier.
allocated-size- numeric uint64 Unformatted allocated-size value in blocks.
available-size string The available capacity in the tier.
available-size-numeric uint64 Unformatted available-size value in blocks.
affinity-size string The total size of volumes configured to have affinity for that tier.
affinity-size-numeric uint64 Unformatted affinity-size value in blocks.
time-settings-table
This basetype is used by show controller-date.
Table 127. time-settings-table properties
Name Type Description
date-time string Date and time, in the format year-month-day hour:minutes:seconds
(UTC), reported by the controller being accessed.
date-time-numeric uint32 Unformatted date-time value.
time-zone-offset string The system time zone as an offset in hours and minutes from UTC. This is shown
only if NTP is enabled.
ntp-state string Shows whether Network Time Protocol (NTP) is in use.
● activated: NTP is enabled.
● deactivated: NTP is disabled.
ntp-address string NTP server IP address, or 0.0.0.0 if not set.
414 API basetype properties