CLI Guide

Table 128. unhealthy-component properties (continued)
Name Type Description
● 21: host
● 25: volume map
● 26: system
component-id string Component identifier, such as A for controller A.
basetype string Component basetype.
primary-key string Durable ID of the component.
health string Component health.
● OK
● Degraded
● Fault
● Unknown
● N/A
health-numeric uint32 Numeric equivalents for health values.
● 0: OK
● 1: Degraded
● 2: Fault
● 3: Unknown
● 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unused-disks-preview
This basetype is used by add storage on page 36 when the preview parameter is specified.
Table 129. unused-disks-preview properties
Name Type Description
location string Disk enclosure ID and slot number.
type string Disk description.
● SAS: Enterprise SAS spinning disk.
● SAS MDL: Midline SAS spinning disk.
● SSD SAS: SAS solid-state disk.
type-numeric uint32 Numeric equivalents for description values.
● 4: SAS
● 8: SSD SAS
● 11: SAS MDL
tier string
● Archive: The disk group is in the lowest storage tier, which uses midline
spinning SAS disks (<10k RPM, high capacity).
● Performance: The disk group is in the highest storage tier, which uses SSDs
(high speed).
● Read Cache: The disk is an SSD providing high-speed read cache for a
storage pool.
● Standard: The disk group is in the storage tier that uses enterprise-class
spinning SAS disks (10k/15k RPM, higher capacity)
tier-numeric uint32 Numeric equivalents for storage-tier values.
416 API basetype properties