CLI Guide

Table 137. volume-groups (continued)
Name Type Description
member-count uint32 The number of volumes in the volume group.
replication-set- serial string The serial number of the replication set.
volumes Embedded; see volumes on page 429.
volume-group-view
This basetype is used by show maps if volume groups exist.
Table 138. volume-group-view properties
Name Type Description
durable-id string Volume group ID.
serial-number string The serial number of the volume group.
group-name string The name of the volume group in the format volume-group.* , where the *
represents all volumes in the group.
volume-view- mappings Embedded; see volume-view-mappings on page 435.
volume-group-view-mappings
This basetype is used by show maps.
Table 139. volume-group-view-mappings properties
Name Type Description
durable-id string Mapping ID.
parent-id string For a mapping between a volume and an initiator, the volume ID — or if
the volume is a member of a volume group, the volume-group ID.
mapped-id string The ID of the mapping target, such as an initiator.
ports string
● The controller host ports to which the mapping applies.
● Blank if not mapped or mapped as no-access.
access string Type of host access to the volume.
● read-write: Read and write.
● read-only: Read only.
● no-access: No access (masked).
● not-mapped: Not mapped.
access-numeric uint32 Numeric equivalents of access values.
● 0: not-mapped
● 1: no-access
● 2: read-only
● 3: read-write
initiator-id string
● For an FC initiator, its WWPN.
● For a SAS initiator, its WWPN.
● For an iSCSI initiator, its node name (typically the IQN).
● all other initiators: The volume's default mapping.
nickname string
● For a host, its name in the format host-name.* , where the *
represents all initiators in the host.
API basetype properties 427