CLI Guide

Table 146. Settings changed by restore defaults (continued)
Setting Value
● Email domain
● Email sender
● Include logs
● (none)
● (none)
● Disabled
SSL/SSH certificates (preserved)
License (preserved)
Disk group metadata (preserved)
Host port settings:
● FC link speed
● FC topology
Settings:
● Auto
● Point-to-point
Host names and profiles (preserved)
Drive spin down Disabled
Advanced settings:
● Disk group background scrub
● Disk group background scrub interval
● Partner firmware upgrade
● Utility priority
● SMART
● Dynamic spare configuration
● Enclosure polling rate
● Host control of caching
● Sync cache mode
● Independent Cache mode
● Missing LUN response
● Controller failure
● Supercap failure
● CompactFlash failure
● Power supply failure
● Fan failure
● Temperature exceeded
● Partner notify
● Auto write back
● Inactive drive spin down
● Inactive drive spin down delay
● Disk background scrub
● Managed logs
● Single controller mode
● Auto stall recovery
● Restart on CAPI fail
● Large pools
Settings:
● Enabled
● 24 hours
● Enabled
● Low
● Enabled
● Disabled
● 5 seconds
● Disabled
● Immediate
● Disabled
● Illegal request
● Disabled
● Enabled
● Enabled
● Disabled
● Disabled
● Disabled
● Disabled
● Enabled
● Disabled
● 15 minutes
● Disabled
● Disabled
● Disabled (for a dual-controller system)
● Enabled
● Enabled
● Disabled
FDE settings
(preserved)
Peer connections (preserved)
Replication sets (preserved)
Enclosure settings:
● Name
● Location
● Rack number
● Rack position
Settings:
● (cleared)
● (cleared)
● 0
● 0
438 Settings changed by restore defaults