CLI Guide

[storage-size-units auto|MB|GB|TB]
[temperature-scale celsius|c|fahrenheit|f]
[timeout #]
[trap-host address]
[type novice|standard|advanced|diagnostic]
[units auto|MB|GB|TB]
name
Parameters
authentication-type MD5|SHA|none
Optional. For an SNMPv3 user, this specifies whether to use a security authentication protocol.
Authentication uses the user password.
● MD5: MD5 authentication. This is the default.
● SHA: SHA-1 authentication.
● none: No authentication.
base 2|10
Optional. Sets the base for entry and display of storage-space sizes:
● 2: Sizes are shown as powers of 2, using 1024 as a divisor for each magnitude. In base 2 when you
set a size, whether you specify a base-2 or base-10 size unit, the resulting size is in base 2
● 10: Sizes are shown as powers of 10, using 1000 as a divisor for each magnitude. In base 10 when
you set a size, the resulting size is in the specified unit. This option is the default.
Operating systems usually show volume size in base 2. Disk drives usually show size in base 10.
Memory (RAM and ROM) size is always shown in base 2.
interfaces interfaces
Optional. Specifies the interfaces that the user can access. Multiple values must be separated by
commas and no spaces. A command that specifies snmpuser or snmptarget cannot also specify a
non-SNMP interface.
● cli: Command-line interface. This is enabled by default.
●
wbi: PowerVault Manager web-browser interface. This is enabled by default.
● ftp: FTP or SFTP interface.
● smis: Storage Management Initiative Specification (SMI-S) interface. Not supported for a
system with 5U84 enclosures.
● snmpuser:Allows an SNMPv3 user to view the SNMP MIB.
● snmptarget: Allows an SNMPv3 user to receive SNMP trap notifications. This option requires
the trap-host parameter.
● none: No interfaces.
The smis option is not supported for a user with the monitor or diagnostic role. A command
that specifies snmpuser or snmptarget cannot also specify a non-SNMP interface. To enable or
disable interface protocols, use the set protocols command.
locale English|en|Spanish|es|French|fr|German|de|Japanese|ja|Korean|ko|
Chinese-simplified|zh-s
Optional. The display language. The default is English.
password password
Optional in console format; required for API format. Sets a new password for the user. Input rules:
● The value is case-sensitive.
● The value can have 8 to 32 characters..
● The value can include spaces and printable UTF-8 characters except: " , . < \
● A value that includes only printable ASCII characters must include at least one uppercase
character, one lowercase character, one numeric character, and one non-alphanumeric character.
If this parameter is omitted, the command prompts you to enter and re-enter a value, which is
displayed obscured for security reasons. For an SNMPv3 user whose authentication-type
parameter is set to use authentication, this specifies the authentication password.
precision #
58
Alphabetical list of commands